| | | | Recommended Surface Prep | | | The wood to be stained must be dry, clean and free of any oil, grease, fingerprints or other surface contaminants. Solvent washing is the most effective method. Fill any surface imperfections with wood putty or stainable wood filler. Always sand and dust between coats to ensure a smooth surface. Windowsills that are exposed to a large amount of UV that requires a gloss finish should use #1130 Spar Varnish in place of #1120 Gloss Varnish. |  |
| Primer Options | | | Oil | | #1110 Pigmented Wiping Stain | | #1400 Line Woodkraft Standard Color |
|
| Note: Always lay used stain rags out to dry or store in approved metal containers |
| Sheen | Finish Coat Oprtions | | Stain | | ~ 1122 Polyurethane Satin Varnish |
| | Gloss | | ~ 1120 Polyurethane Gloss Varnish | | ~ 1130 Marine Spar Varnish |
|
Please consult the products data sheet for complete instructions on surface preparation, application technique and recommended uses. For additional information, please Contact a Farrell-Calhoun Representative. |
| | |
